Cabinet cost by metro
Cabinet Painting Cost in Phoenix-Mesa-Chandler
Cabinet painting in Phoenix-Mesa-Chandler costs $2,700 to $4,100 for an average 30 door kitchen, priced per door rather than by area, at Phoenix-Mesa-Chandler’s own wage of $25.98 an hour.
By kitchen size
| Kitchen | Doors | Labour | Materials | Typical range |
|---|---|---|---|---|
| Small galley | 20 | $1,829 | $440 | $1,800 to $2,700 |
| Average kitchen | 30 | $2,743 | $660 | $2,700 to $4,100 |
| Large kitchen | 45 | $4,115 | $990 | $4,100 to $6,150 |
| Kitchen plus island and pantry | 60 | $5,487 | $1,320 | $5,450 to $8,150 |
Works out at about $113 per door at Phoenix-Mesa-Chandler's own wage. A door and a drawer front each count as one unit, and boxes and frames are included in the labour. Note the model scales linearly, so it will understate a very small kitchen, where a contractor minimum charge usually applies, and overstate a very large one, where setup is spread further.
Why the labour share is so high
Cabinet work runs at roughly 81% labour, the highest share of any job on this site, because almost none of the cost is paint. Doors come off, get degreased, sanded or de-glossed, primed, sprayed with two finish coats with drying time between, then reassembled and re-hung square. That is true in Phoenix-Mesa-Chandler exactly as it is everywhere. Solid wood and MDF doors take paint well; thermofoil and laminate need specialist treatment and are often priced separately.
How Phoenix-Mesa-Chandler compares
Phoenix-Mesa-Chandler ranks 109 of 361 US metros by painter wage, above the middle of the national range. See the full cost breakdown for Phoenix-Mesa-Chandler for interior and exterior pricing too.
Common questions
How much does cabinet painting cost in Phoenix-Mesa-Chandler?
Roughly $2,700 to $4,100 for an average 30 door kitchen in Phoenix-Mesa-Chandler, priced per door rather than by square footage.
Why is cabinet painting so labour-heavy in Phoenix-Mesa-Chandler?
Because it is nearly 81% labour everywhere, not just in Phoenix-Mesa-Chandler. Doors are removed, degreased, sanded, primed, sprayed twice with drying time between, and reassembled square.
Is this a quote for a job in Phoenix-Mesa-Chandler?
No. It is a modelled range built from the local wage. Nobody has seen your walls or your prep condition.
What this page does not tell you
- Assumes solid wood or MDF doors in sound condition.
- Thermofoil and laminate need specialist treatment and are not covered here.
- Assumes doors are sprayed off site or in a controlled area, which is standard for a quality finish.
- Excludes new hardware, hinges and any carcass repair.